Aokin ESP32-CAM Camera Module, ESP32 Development Board WiFi and Bluetooth with OV2640 2MP Camera for Arduino, Include ESP32-CAM-MB Micro USB to Serial Port CH340C, 1 Pcs

Specifications:
IO port: 9
Power supply: 5V 2A
SPI Flash: default 32Mbit
Dimension: 27*40mm/1.06*1.57in
RAM: built-in 520KB SRAM+4MB PSRAM
Wi-Fi: 802.11b/g/n/e/i
Bluetooth: Bluetooth 4.2 BR/EDR and BLE standards
Spectrum Range: 2412~2484MHz
Support TF card: maximum support 4G
Support Interface: UART, SPI, I2C, PWM
Serial Port Baud-rate: Default 115200 bps
Antenna: onboard PCB antenna, gain 2dBi
Security: WPA/WPA2/WPA2-Enterprise/WPS
Image Output Format: JPEG( OV2640 support only ), BMP, GRAYSCALE

Features:
Supports WiFi Image Upload.
Support multiple sleep modes.
Embedded Lwip and FreeRTOS.
Support secondary development.
Support STA/AP/STA+AP working mode.
Support OV2640 and OV7670 cameras, built-in flash.
Support Smart Config/AirKiss one-click network configuration.
Clock speed up to 160 MHz, Computing power up to 600 DMIPS.
Support for serial port local and remote firmware upgrades (FOTA).

Package Included:
1 x ESP32-CAM Module
1 x Camera Module OV2640 2MP
1 x ESP32-CAM-MB Module – USB-TTL Serial Adapter Module
The ESP32-CAM camera module is based on an ESP32 chip with an OV2640 2MP camera, built-in flash, also supports OV7670 cameras. Small and compact design, can fit on a solderless breadboard, saves space for your project
Specifications: The board uses high-performance dual-core 32-bit LX6 CPU, can be used as an application processor, integrates WiFi, traditional Bluetooth, and low power BLE. its main frequency adjustment ranges from 80MHz to 240MHz, adopts 7-stage pipeline architecture, on-chip sensor, Hall sensor, temperature sensor, and so on
Features: the board fully compliant with WiFi 802.11b/g/n/e/i and Bluetooth 4.2 standards, have 9 GPIO ports, built-in 520 KB SRAM plus 4MB PSRAM, support UART/SPI/I2C/PWM and other interfaces, STA/AP/STA+AP working mode, maximum 4G TF card, image WiFI upload, multiple sleep modes, secondary development, etc
Use: ESP32-CAM can be widely used in various IoT applications, suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals, and other IoT applications. It is an ideal solution for IoT applications
Note: since comes with ESP32-CAM-MB: Micro USB to Serial Port CH340C chip, so no longer needs to use a converter to program it. Plug and play, use the Micro USB cable to connect the PC and the ESP32-CAM-MB board